Home > Exhibition > Content

The technological process of wooden door

Jan 21, 2017

(1) carefully check the door leaf door cover is not complete, the quality is unqualified, unqualified products are not allowed packaging factory, it is forbidden to wrong color, color, the product to should take put down gently;

(2) the packaging before, should remove the glue mark on the surface of the work and impurities, and packaging film, protected with corrugated paper four door Angle;

(3) label, put in storage after fill in the receipt.

13, installation,

(1) determine the mouth of the cave and the door, after having confirmed to set cover, set set of calibration, glue, install door leaf;

(2) the door and the wall of our glass glue is convergent, the door should glue more below, to prevent excessive water to enter the door;